325/35R24 vs 345/35R24
Going from one to the other changes the overall height by +1.7 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 325/35R24 | 345/35R24 | Change |
|---|---|---|---|
| Overall height | 33.0" | 33.5" | +1.7 % |
| Sidewall | 4.48" | 4.75" | +6.2 % |
| Section width | 325 mm | 345 mm | +6.2 % |
| Circumference | 103.5" | 105.3" | +1.7 % |
| Revs per mile | 612 | 602 | -1.7 % |
| Axle height | 16.48" | 16.75" | +7.0 mm |
| Approved rim width | 9–12" | 9.5–12.5" | overlap 9.5–12" |
Both are approved on a rim 9.5" to 12" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 325/35R24. Fit 345/35R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.5 mph | +0.5 |
| 50 mph | 50.8 mph | +0.8 |
| 70 mph | 71.2 mph | +1.2 |
| 90 mph | 91.5 mph | +1.5 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,167 on the road, so it under-counts by 167. At a true 70 mph the first turns 714 times a minute, the second 702.