325/40R18 vs 345/40R18
Going from one to the other changes the overall height by +2.2 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 325/40R18 | 345/40R18 | Change |
|---|---|---|---|
| Overall height | 28.2" | 28.9" | +2.2 % |
| Sidewall | 5.12" | 5.43" | +6.2 % |
| Section width | 325 mm | 345 mm | +6.2 % |
| Circumference | 88.7" | 90.7" | +2.2 % |
| Revs per mile | 714 | 699 | -2.2 % |
| Axle height | 14.12" | 14.43" | +8.0 mm |
| Approved rim width | 9–12" | 9.5–12.5" | overlap 9.5–12" |
Both are approved on a rim 9.5" to 12" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 325/40R18. Fit 345/40R18 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.7 mph | +0.7 |
| 50 mph | 51.1 mph | +1.1 |
| 70 mph | 71.6 mph | +1.6 |
| 90 mph | 92.0 mph | +2.0 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,223 on the road, so it under-counts by 223. At a true 70 mph the first turns 833 times a minute, the second 815.