325/40R22 vs 345/40R22
Going from one to the other changes the overall height by +2.0 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 325/40R22 | 345/40R22 | Change |
|---|---|---|---|
| Overall height | 32.2" | 32.9" | +2.0 % |
| Sidewall | 5.12" | 5.43" | +6.2 % |
| Section width | 325 mm | 345 mm | +6.2 % |
| Circumference | 101.3" | 103.3" | +2.0 % |
| Revs per mile | 626 | 614 | -2.0 % |
| Axle height | 16.12" | 16.43" | +8.0 mm |
| Approved rim width | 9–12" | 9.5–12.5" | overlap 9.5–12" |
Both are approved on a rim 9.5" to 12" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 325/40R22. Fit 345/40R22 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.6 mph | +0.6 |
| 50 mph | 51.0 mph | +1.0 |
| 70 mph | 71.4 mph | +1.4 |
| 90 mph | 91.8 mph | +1.8 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,195 on the road, so it under-counts by 195. At a true 70 mph the first turns 730 times a minute, the second 716.