325/45R18 vs 335/45R18
Going from one to the other changes the overall height by +1.2 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 325/45R18 | 335/45R18 | Change |
|---|---|---|---|
| Overall height | 29.5" | 29.9" | +1.2 % |
| Sidewall | 5.76" | 5.94" | +3.1 % |
| Section width | 325 mm | 335 mm | +3.1 % |
| Circumference | 92.7" | 93.8" | +1.2 % |
| Revs per mile | 683 | 675 | -1.2 % |
| Axle height | 14.76" | 14.94" | +4.5 mm |
| Approved rim width | 9–12" | 9.5–12.5" | overlap 9.5–12" |
Both are approved on a rim 9.5" to 12" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 325/45R18. Fit 335/45R18 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.4 mph | +0.4 |
| 50 mph | 50.6 mph | +0.6 |
| 70 mph | 70.8 mph | +0.8 |
| 90 mph | 91.1 mph | +1.1 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,120 on the road, so it under-counts by 120. At a true 70 mph the first turns 797 times a minute, the second 788.