325/50R18 vs 345/50R18
Going from one to the other changes the overall height by +2.6 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 325/50R18 | 345/50R18 | Change |
|---|---|---|---|
| Overall height | 30.8" | 31.6" | +2.6 % |
| Sidewall | 6.40" | 6.79" | +6.2 % |
| Section width | 325 mm | 345 mm | +6.2 % |
| Circumference | 96.7" | 99.2" | +2.6 % |
| Revs per mile | 655 | 639 | -2.6 % |
| Axle height | 15.40" | 15.79" | +10.0 mm |
| Approved rim width | 9–12" | 9.5–12.5" | overlap 9.5–12" |
Both are approved on a rim 9.5" to 12" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 325/50R18. Fit 345/50R18 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.8 mph | +0.8 |
| 50 mph | 51.3 mph | +1.3 |
| 70 mph | 71.8 mph | +1.8 |
| 90 mph | 92.3 mph | +2.3 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,256 on the road, so it under-counts by 256. At a true 70 mph the first turns 764 times a minute, the second 745.