325/50R19 vs 305/50R19
Going from one to the other changes the overall height by -2.5 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 325/50R19 | 305/50R19 | Change |
|---|---|---|---|
| Overall height | 31.8" | 31.0" | -2.5 % |
| Sidewall | 6.40" | 6.00" | -6.2 % |
| Section width | 325 mm | 305 mm | -6.2 % |
| Circumference | 99.9" | 97.4" | -2.5 % |
| Revs per mile | 634 | 650 | +2.5 % |
| Axle height | 15.90" | 15.50" | -10.0 mm |
| Approved rim width | 9–12" | 8.5–11" | overlap 9–11" |
Both are approved on a rim 9" to 11" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 325/50R19. Fit 305/50R19 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.3 mph | -0.7 |
| 50 mph | 48.8 mph | -1.2 |
| 70 mph | 68.3 mph | -1.7 |
| 90 mph | 87.8 mph | -2.2 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,752 on the road, so it over-counts by 248. At a true 70 mph the first turns 740 times a minute, the second 759.