325/50R20 vs 335/45R20
Going from one to the other changes the overall height by -2.8 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 325/50R20 | 335/45R20 | Change |
|---|---|---|---|
| Overall height | 32.8" | 31.9" | -2.8 % |
| Sidewall | 6.40" | 5.94" | -7.2 % |
| Section width | 325 mm | 335 mm | +3.1 % |
| Circumference | 103.0" | 100.1" | -2.8 % |
| Revs per mile | 615 | 633 | +2.8 % |
| Axle height | 16.40" | 15.94" | -11.8 mm |
| Approved rim width | 9–12" | 9.5–12.5" | overlap 9.5–12" |
Both are approved on a rim 9.5" to 12" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 325/50R20. Fit 335/45R20 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.2 mph | -0.8 |
| 50 mph | 48.6 mph | -1.4 |
| 70 mph | 68.0 mph | -2.0 |
| 90 mph | 87.5 mph | -2.5 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,718 on the road, so it over-counts by 282. At a true 70 mph the first turns 717 times a minute, the second 738.
What drivers reported
325/50R20 carries 1 complaints. Nobody has filed one naming 335/45R20.