325/50R22 vs 335/45R22
Going from one to the other changes the overall height by -2.7 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 325/50R22 | 335/45R22 | Change |
|---|---|---|---|
| Overall height | 34.8" | 33.9" | -2.7 % |
| Sidewall | 6.40" | 5.94" | -7.2 % |
| Section width | 325 mm | 335 mm | +3.1 % |
| Circumference | 109.3" | 106.4" | -2.7 % |
| Revs per mile | 580 | 595 | +2.7 % |
| Axle height | 17.40" | 16.94" | -11.8 mm |
| Approved rim width | 9–12" | 9.5–12.5" | overlap 9.5–12" |
Both are approved on a rim 9.5" to 12" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 325/50R22. Fit 335/45R22 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.2 mph | -0.8 |
| 50 mph | 48.7 mph | -1.3 |
| 70 mph | 68.1 mph | -1.9 |
| 90 mph | 87.6 mph | -2.4 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,734 on the road, so it over-counts by 266. At a true 70 mph the first turns 676 times a minute, the second 695.