325/50R22 vs 345/50R22
Going from one to the other changes the overall height by +2.3 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 325/50R22 | 345/50R22 | Change |
|---|---|---|---|
| Overall height | 34.8" | 35.6" | +2.3 % |
| Sidewall | 6.40" | 6.79" | +6.2 % |
| Section width | 325 mm | 345 mm | +6.2 % |
| Circumference | 109.3" | 111.8" | +2.3 % |
| Revs per mile | 580 | 567 | -2.3 % |
| Axle height | 17.40" | 17.79" | +10.0 mm |
| Approved rim width | 9–12" | 9.5–12.5" | overlap 9.5–12" |
Both are approved on a rim 9.5" to 12" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 325/50R22. Fit 345/50R22 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.7 mph | +0.7 |
| 50 mph | 51.1 mph | +1.1 |
| 70 mph | 71.6 mph | +1.6 |
| 90 mph | 92.0 mph | +2.0 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,226 on the road, so it under-counts by 226. At a true 70 mph the first turns 676 times a minute, the second 661.