325/55R24 vs 305/60R24
Going from one to the other changes the overall height by +0.9 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 325/55R24 | 305/60R24 | Change |
|---|---|---|---|
| Overall height | 38.1" | 38.4" | +0.9 % |
| Sidewall | 7.04" | 7.20" | +2.4 % |
| Section width | 325 mm | 305 mm | -6.2 % |
| Circumference | 119.6" | 120.7" | +0.9 % |
| Revs per mile | 530 | 525 | -0.9 % |
| Axle height | 19.04" | 19.20" | +4.3 mm |
| Approved rim width | 9–12" | 8.5–11" | overlap 9–11" |
Both are approved on a rim 9" to 11" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 325/55R24. Fit 305/60R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.3 mph | +0.3 |
| 50 mph | 50.4 mph | +0.4 |
| 70 mph | 70.6 mph | +0.6 |
| 90 mph | 90.8 mph | +0.8 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,088 on the road, so it under-counts by 88. At a true 70 mph the first turns 618 times a minute, the second 613.