325/60R19 vs 345/55R19
Going from one to the other changes the overall height by -1.2 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 325/60R19 | 345/55R19 | Change |
|---|---|---|---|
| Overall height | 34.4" | 33.9" | -1.2 % |
| Sidewall | 7.68" | 7.47" | -2.7 % |
| Section width | 325 mm | 345 mm | +6.2 % |
| Circumference | 107.9" | 106.6" | -1.2 % |
| Revs per mile | 587 | 594 | +1.2 % |
| Axle height | 17.18" | 16.97" | -5.3 mm |
| Approved rim width | 9–12" | 9.5–12.5" | overlap 9.5–12" |
Both are approved on a rim 9.5" to 12" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 325/60R19. Fit 345/55R19 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.6 mph | -0.4 |
| 50 mph | 49.4 mph | -0.6 |
| 70 mph | 69.2 mph | -0.8 |
| 90 mph | 88.9 mph | -1.1 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,880 on the road, so it over-counts by 120. At a true 70 mph the first turns 685 times a minute, the second 693.