325/60R23 vs 335/60R23
Going from one to the other changes the overall height by +1.2 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 325/60R23 | 335/60R23 | Change |
|---|---|---|---|
| Overall height | 38.4" | 38.8" | +1.2 % |
| Sidewall | 7.68" | 7.91" | +3.1 % |
| Section width | 325 mm | 335 mm | +3.1 % |
| Circumference | 120.5" | 122.0" | +1.2 % |
| Revs per mile | 526 | 519 | -1.2 % |
| Axle height | 19.18" | 19.41" | +6.0 mm |
| Approved rim width | 9–12" | 9.5–12.5" | overlap 9.5–12" |
Both are approved on a rim 9.5" to 12" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 325/60R23. Fit 335/60R23 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.4 mph | +0.4 |
| 50 mph | 50.6 mph | +0.6 |
| 70 mph | 70.9 mph | +0.9 |
| 90 mph | 91.1 mph | +1.1 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,123 on the road, so it under-counts by 123. At a true 70 mph the first turns 613 times a minute, the second 606.