325/60R23 vs 345/60R23
Going from one to the other changes the overall height by +2.5 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 325/60R23 | 345/60R23 | Change |
|---|---|---|---|
| Overall height | 38.4" | 39.3" | +2.5 % |
| Sidewall | 7.68" | 8.15" | +6.2 % |
| Section width | 325 mm | 345 mm | +6.2 % |
| Circumference | 120.5" | 123.5" | +2.5 % |
| Revs per mile | 526 | 513 | -2.5 % |
| Axle height | 19.18" | 19.65" | +12.0 mm |
| Approved rim width | 9–12" | 9.5–12.5" | overlap 9.5–12" |
Both are approved on a rim 9.5" to 12" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 325/60R23. Fit 345/60R23 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.7 mph | +0.7 |
| 50 mph | 51.2 mph | +1.2 |
| 70 mph | 71.7 mph | +1.7 |
| 90 mph | 92.2 mph | +2.2 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,246 on the road, so it under-counts by 246. At a true 70 mph the first turns 613 times a minute, the second 599.