325/60R24 vs 315/65R24
Going from one to the other changes the overall height by +2.0 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 325/60R24 | 315/65R24 | Change |
|---|---|---|---|
| Overall height | 39.4" | 40.1" | +2.0 % |
| Sidewall | 7.68" | 8.06" | +5.0 % |
| Section width | 325 mm | 315 mm | -3.1 % |
| Circumference | 123.6" | 126.0" | +2.0 % |
| Revs per mile | 512 | 503 | -2.0 % |
| Axle height | 19.68" | 20.06" | +9.8 mm |
| Approved rim width | 9–12" | 8.5–11.5" | overlap 9–11.5" |
Both are approved on a rim 9" to 11.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 325/60R24. Fit 315/65R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.6 mph | +0.6 |
| 50 mph | 51.0 mph | +1.0 |
| 70 mph | 71.4 mph | +1.4 |
| 90 mph | 91.8 mph | +1.8 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,195 on the road, so it under-counts by 195. At a true 70 mph the first turns 598 times a minute, the second 586.