325/65R18 vs 345/60R18
Going from one to the other changes the overall height by -1.0 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 325/65R18 | 345/60R18 | Change |
|---|---|---|---|
| Overall height | 34.6" | 34.3" | -1.0 % |
| Sidewall | 8.32" | 8.15" | -2.0 % |
| Section width | 325 mm | 345 mm | +6.2 % |
| Circumference | 108.8" | 107.8" | -1.0 % |
| Revs per mile | 582 | 588 | +1.0 % |
| Axle height | 17.32" | 17.15" | -4.3 mm |
| Approved rim width | 9–12" | 9.5–12.5" | overlap 9.5–12" |
Both are approved on a rim 9.5" to 12" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 325/65R18. Fit 345/60R18 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.7 mph | -0.3 |
| 50 mph | 49.5 mph | -0.5 |
| 70 mph | 69.3 mph | -0.7 |
| 90 mph | 89.1 mph | -0.9 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,903 on the road, so it over-counts by 97. At a true 70 mph the first turns 679 times a minute, the second 686.
What drivers reported
325/65R18 carries 2 complaints. Nobody has filed one naming 345/60R18.