325/65R20 vs 345/60R20
Going from one to the other changes the overall height by -0.9 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 325/65R20 | 345/60R20 | Change |
|---|---|---|---|
| Overall height | 36.6" | 36.3" | -0.9 % |
| Sidewall | 8.32" | 8.15" | -2.0 % |
| Section width | 325 mm | 345 mm | +6.2 % |
| Circumference | 115.1" | 114.0" | -0.9 % |
| Revs per mile | 551 | 556 | +0.9 % |
| Axle height | 18.32" | 18.15" | -4.3 mm |
| Approved rim width | 9–12" | 9.5–12.5" | overlap 9.5–12" |
Both are approved on a rim 9.5" to 12" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 325/65R20. Fit 345/60R20 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.7 mph | -0.3 |
| 50 mph | 49.5 mph | -0.5 |
| 70 mph | 69.4 mph | -0.6 |
| 90 mph | 89.2 mph | -0.8 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,909 on the road, so it over-counts by 91. At a true 70 mph the first turns 642 times a minute, the second 648.