335/25R19 vs 325/25R19
Going from one to the other changes the overall height by -0.8 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 335/25R19 | 325/25R19 | Change |
|---|---|---|---|
| Overall height | 25.6" | 25.4" | -0.8 % |
| Sidewall | 3.30" | 3.20" | -3.0 % |
| Section width | 335 mm | 325 mm | -3.0 % |
| Circumference | 80.4" | 79.8" | -0.8 % |
| Revs per mile | 788 | 794 | +0.8 % |
| Axle height | 12.80" | 12.70" | -2.5 mm |
| Approved rim width | 9.5–12.5" | 9–12" | overlap 9.5–12" |
Both are approved on a rim 9.5" to 12" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 335/25R19. Fit 325/25R19 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.8 mph | -0.2 |
| 50 mph | 49.6 mph | -0.4 |
| 70 mph | 69.5 mph | -0.5 |
| 90 mph | 89.3 mph | -0.7 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,923 on the road, so it over-counts by 77. At a true 70 mph the first turns 919 times a minute, the second 926.