335/25R24 vs 345/25R24
Going from one to the other changes the overall height by +0.6 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 335/25R24 | 345/25R24 | Change |
|---|---|---|---|
| Overall height | 30.6" | 30.8" | +0.6 % |
| Sidewall | 3.30" | 3.40" | +3.0 % |
| Section width | 335 mm | 345 mm | +3.0 % |
| Circumference | 96.1" | 96.7" | +0.6 % |
| Revs per mile | 659 | 655 | -0.6 % |
| Axle height | 15.30" | 15.40" | +2.5 mm |
| Approved rim width | 9.5–12.5" | 9.5–12.5" | overlap 9.5–12.5" |
Both are approved on a rim 9.5" to 12.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 335/25R24. Fit 345/25R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.2 mph | +0.2 |
| 50 mph | 50.3 mph | +0.3 |
| 70 mph | 70.5 mph | +0.5 |
| 90 mph | 90.6 mph | +0.6 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,064 on the road, so it under-counts by 64. At a true 70 mph the first turns 769 times a minute, the second 764.