335/25R24 vs 355/25R24
Going from one to the other changes the overall height by +1.3 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 335/25R24 | 355/25R24 | Change |
|---|---|---|---|
| Overall height | 30.6" | 31.0" | +1.3 % |
| Sidewall | 3.30" | 3.49" | +6.0 % |
| Section width | 335 mm | 355 mm | +6.0 % |
| Circumference | 96.1" | 97.4" | +1.3 % |
| Revs per mile | 659 | 651 | -1.3 % |
| Axle height | 15.30" | 15.49" | +5.0 mm |
| Approved rim width | 9.5–12.5" | 10–13" | overlap 10–12.5" |
Both are approved on a rim 10" to 12.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 335/25R24. Fit 355/25R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.4 mph | +0.4 |
| 50 mph | 50.6 mph | +0.6 |
| 70 mph | 70.9 mph | +0.9 |
| 90 mph | 91.2 mph | +1.2 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,129 on the road, so it under-counts by 129. At a true 70 mph the first turns 769 times a minute, the second 759.