335/30R24 vs 355/25R24
Going from one to the other changes the overall height by -2.9 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 335/30R24 | 355/25R24 | Change |
|---|---|---|---|
| Overall height | 31.9" | 31.0" | -2.9 % |
| Sidewall | 3.96" | 3.49" | -11.7 % |
| Section width | 335 mm | 355 mm | +6.0 % |
| Circumference | 100.3" | 97.4" | -2.9 % |
| Revs per mile | 632 | 651 | +2.9 % |
| Axle height | 15.96" | 15.49" | -11.8 mm |
| Approved rim width | 9.5–12.5" | 10–13" | overlap 10–12.5" |
Both are approved on a rim 10" to 12.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 335/30R24. Fit 355/25R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.1 mph | -0.9 |
| 50 mph | 48.6 mph | -1.4 |
| 70 mph | 68.0 mph | -2.0 |
| 90 mph | 87.4 mph | -2.6 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,710 on the road, so it over-counts by 290. At a true 70 mph the first turns 737 times a minute, the second 759.