335/35R23 vs 315/40R23
Going from one to the other changes the overall height by +2.1 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 335/35R23 | 315/40R23 | Change |
|---|---|---|---|
| Overall height | 32.2" | 32.9" | +2.1 % |
| Sidewall | 4.62" | 4.96" | +7.5 % |
| Section width | 335 mm | 315 mm | -6.0 % |
| Circumference | 101.3" | 103.4" | +2.1 % |
| Revs per mile | 626 | 613 | -2.1 % |
| Axle height | 16.12" | 16.46" | +8.8 mm |
| Approved rim width | 9.5–12.5" | 8.5–11.5" | overlap 9.5–11.5" |
Both are approved on a rim 9.5" to 11.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 335/35R23. Fit 315/40R23 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.6 mph | +0.6 |
| 50 mph | 51.1 mph | +1.1 |
| 70 mph | 71.5 mph | +1.5 |
| 90 mph | 91.9 mph | +1.9 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,214 on the road, so it under-counts by 214. At a true 70 mph the first turns 730 times a minute, the second 715.