335/35R24 vs 315/40R24
Going from one to the other changes the overall height by +2.1 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 335/35R24 | 315/40R24 | Change |
|---|---|---|---|
| Overall height | 33.2" | 33.9" | +2.1 % |
| Sidewall | 4.62" | 4.96" | +7.5 % |
| Section width | 335 mm | 315 mm | -6.0 % |
| Circumference | 104.4" | 106.6" | +2.1 % |
| Revs per mile | 607 | 595 | -2.1 % |
| Axle height | 16.62" | 16.96" | +8.8 mm |
| Approved rim width | 9.5–12.5" | 8.5–11.5" | overlap 9.5–11.5" |
Both are approved on a rim 9.5" to 11.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 335/35R24. Fit 315/40R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.6 mph | +0.6 |
| 50 mph | 51.0 mph | +1.0 |
| 70 mph | 71.5 mph | +1.5 |
| 90 mph | 91.9 mph | +1.9 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,207 on the road, so it under-counts by 207. At a true 70 mph the first turns 708 times a minute, the second 694.