335/40R17 vs 315/40R17
Going from one to the other changes the overall height by -2.3 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 335/40R17 | 315/40R17 | Change |
|---|---|---|---|
| Overall height | 27.6" | 26.9" | -2.3 % |
| Sidewall | 5.28" | 4.96" | -6.0 % |
| Section width | 335 mm | 315 mm | -6.0 % |
| Circumference | 86.6" | 84.6" | -2.3 % |
| Revs per mile | 732 | 749 | +2.3 % |
| Axle height | 13.78" | 13.46" | -8.0 mm |
| Approved rim width | 9.5–12.5" | 8.5–11.5" | overlap 9.5–11.5" |
Both are approved on a rim 9.5" to 11.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 335/40R17. Fit 315/40R17 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.3 mph | -0.7 |
| 50 mph | 48.9 mph | -1.1 |
| 70 mph | 68.4 mph | -1.6 |
| 90 mph | 87.9 mph | -2.1 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,771 on the road, so it over-counts by 229. At a true 70 mph the first turns 854 times a minute, the second 874.