335/40R19 vs 355/40R19
Going from one to the other changes the overall height by +2.1 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 335/40R19 | 355/40R19 | Change |
|---|---|---|---|
| Overall height | 29.6" | 30.2" | +2.1 % |
| Sidewall | 5.28" | 5.59" | +6.0 % |
| Section width | 335 mm | 355 mm | +6.0 % |
| Circumference | 92.8" | 94.8" | +2.1 % |
| Revs per mile | 682 | 668 | -2.1 % |
| Axle height | 14.78" | 15.09" | +8.0 mm |
| Approved rim width | 9.5–12.5" | 10–13" | overlap 10–12.5" |
Both are approved on a rim 10" to 12.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 335/40R19. Fit 355/40R19 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.6 mph | +0.6 |
| 50 mph | 51.1 mph | +1.1 |
| 70 mph | 71.5 mph | +1.5 |
| 90 mph | 91.9 mph | +1.9 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,213 on the road, so it under-counts by 213. At a true 70 mph the first turns 796 times a minute, the second 780.