335/40R20 vs 345/40R20
Going from one to the other changes the overall height by +1.0 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 335/40R20 | 345/40R20 | Change |
|---|---|---|---|
| Overall height | 30.6" | 30.9" | +1.0 % |
| Sidewall | 5.28" | 5.43" | +3.0 % |
| Section width | 335 mm | 345 mm | +3.0 % |
| Circumference | 96.0" | 97.0" | +1.0 % |
| Revs per mile | 660 | 653 | -1.0 % |
| Axle height | 15.28" | 15.43" | +4.0 mm |
| Approved rim width | 9.5–12.5" | 9.5–12.5" | overlap 9.5–12.5" |
Both are approved on a rim 9.5" to 12.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 335/40R20. Fit 345/40R20 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.3 mph | +0.3 |
| 50 mph | 50.5 mph | +0.5 |
| 70 mph | 70.7 mph | +0.7 |
| 90 mph | 90.9 mph | +0.9 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,103 on the road, so it under-counts by 103. At a true 70 mph the first turns 770 times a minute, the second 762.