335/45R23 vs 325/45R23
Going from one to the other changes the overall height by -1.0 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 335/45R23 | 325/45R23 | Change |
|---|---|---|---|
| Overall height | 34.9" | 34.5" | -1.0 % |
| Sidewall | 5.94" | 5.76" | -3.0 % |
| Section width | 335 mm | 325 mm | -3.0 % |
| Circumference | 109.5" | 108.4" | -1.0 % |
| Revs per mile | 578 | 584 | +1.0 % |
| Axle height | 17.44" | 17.26" | -4.5 mm |
| Approved rim width | 9.5–12.5" | 9–12" | overlap 9.5–12" |
Both are approved on a rim 9.5" to 12" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 335/45R23. Fit 325/45R23 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.7 mph | -0.3 |
| 50 mph | 49.5 mph | -0.5 |
| 70 mph | 69.3 mph | -0.7 |
| 90 mph | 89.1 mph | -0.9 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,898 on the road, so it over-counts by 102. At a true 70 mph the first turns 675 times a minute, the second 682.