335/45R24 vs 325/50R24
Going from one to the other changes the overall height by +2.6 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 335/45R24 | 325/50R24 | Change |
|---|---|---|---|
| Overall height | 35.9" | 36.8" | +2.6 % |
| Sidewall | 5.94" | 6.40" | +7.8 % |
| Section width | 335 mm | 325 mm | -3.0 % |
| Circumference | 112.7" | 115.6" | +2.6 % |
| Revs per mile | 562 | 548 | -2.6 % |
| Axle height | 17.94" | 18.40" | +11.8 mm |
| Approved rim width | 9.5–12.5" | 9–12" | overlap 9.5–12" |
Both are approved on a rim 9.5" to 12" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 335/45R24. Fit 325/50R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.8 mph | +0.8 |
| 50 mph | 51.3 mph | +1.3 |
| 70 mph | 71.8 mph | +1.8 |
| 90 mph | 92.3 mph | +2.3 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,258 on the road, so it under-counts by 258. At a true 70 mph the first turns 656 times a minute, the second 639.