335/50R18 vs 345/50R18
Going from one to the other changes the overall height by +1.3 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 335/50R18 | 345/50R18 | Change |
|---|---|---|---|
| Overall height | 31.2" | 31.6" | +1.3 % |
| Sidewall | 6.59" | 6.79" | +3.0 % |
| Section width | 335 mm | 345 mm | +3.0 % |
| Circumference | 98.0" | 99.2" | +1.3 % |
| Revs per mile | 647 | 639 | -1.3 % |
| Axle height | 15.59" | 15.79" | +5.0 mm |
| Approved rim width | 9.5–12.5" | 9.5–12.5" | overlap 9.5–12.5" |
Both are approved on a rim 9.5" to 12.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 335/50R18. Fit 345/50R18 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.4 mph | +0.4 |
| 50 mph | 50.6 mph | +0.6 |
| 70 mph | 70.9 mph | +0.9 |
| 90 mph | 91.1 mph | +1.1 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,126 on the road, so it under-counts by 126. At a true 70 mph the first turns 754 times a minute, the second 745.