335/50R20 vs 325/50R20
Going from one to the other changes the overall height by -1.2 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 335/50R20 | 325/50R20 | Change |
|---|---|---|---|
| Overall height | 33.2" | 32.8" | -1.2 % |
| Sidewall | 6.59" | 6.40" | -3.0 % |
| Section width | 335 mm | 325 mm | -3.0 % |
| Circumference | 104.3" | 103.0" | -1.2 % |
| Revs per mile | 608 | 615 | +1.2 % |
| Axle height | 16.59" | 16.40" | -5.0 mm |
| Approved rim width | 9.5–12.5" | 9–12" | overlap 9.5–12" |
Both are approved on a rim 9.5" to 12" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 335/50R20. Fit 325/50R20 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.6 mph | -0.4 |
| 50 mph | 49.4 mph | -0.6 |
| 70 mph | 69.2 mph | -0.8 |
| 90 mph | 88.9 mph | -1.1 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,881 on the road, so it over-counts by 119. At a true 70 mph the first turns 709 times a minute, the second 717.
What drivers reported
Nobody has filed a complaint naming 335/50R20. 325/50R20 carries 1.