335/50R21 vs 315/50R21
Going from one to the other changes the overall height by -2.3 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 335/50R21 | 315/50R21 | Change |
|---|---|---|---|
| Overall height | 34.2" | 33.4" | -2.3 % |
| Sidewall | 6.59" | 6.20" | -6.0 % |
| Section width | 335 mm | 315 mm | -6.0 % |
| Circumference | 107.4" | 104.9" | -2.3 % |
| Revs per mile | 590 | 604 | +2.3 % |
| Axle height | 17.09" | 16.70" | -10.0 mm |
| Approved rim width | 9.5–12.5" | 8.5–11.5" | overlap 9.5–11.5" |
Both are approved on a rim 9.5" to 11.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 335/50R21. Fit 315/50R21 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.3 mph | -0.7 |
| 50 mph | 48.8 mph | -1.2 |
| 70 mph | 68.4 mph | -1.6 |
| 90 mph | 87.9 mph | -2.1 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,770 on the road, so it over-counts by 230. At a true 70 mph the first turns 688 times a minute, the second 704.