335/50R24 vs 315/50R24
Going from one to the other changes the overall height by -2.1 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 335/50R24 | 315/50R24 | Change |
|---|---|---|---|
| Overall height | 37.2" | 36.4" | -2.1 % |
| Sidewall | 6.59" | 6.20" | -6.0 % |
| Section width | 335 mm | 315 mm | -6.0 % |
| Circumference | 116.8" | 114.4" | -2.1 % |
| Revs per mile | 542 | 554 | +2.1 % |
| Axle height | 18.59" | 18.20" | -10.0 mm |
| Approved rim width | 9.5–12.5" | 8.5–11.5" | overlap 9.5–11.5" |
Both are approved on a rim 9.5" to 11.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 335/50R24. Fit 315/50R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.4 mph | -0.6 |
| 50 mph | 48.9 mph | -1.1 |
| 70 mph | 68.5 mph | -1.5 |
| 90 mph | 88.1 mph | -1.9 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,788 on the road, so it over-counts by 212. At a true 70 mph the first turns 633 times a minute, the second 646.