335/55R20 vs 325/60R20
Going from one to the other changes the overall height by +2.5 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 335/55R20 | 325/60R20 | Change |
|---|---|---|---|
| Overall height | 34.5" | 35.4" | +2.5 % |
| Sidewall | 7.25" | 7.68" | +5.8 % |
| Section width | 335 mm | 325 mm | -3.0 % |
| Circumference | 108.4" | 111.1" | +2.5 % |
| Revs per mile | 584 | 570 | -2.5 % |
| Axle height | 17.25" | 17.68" | +10.8 mm |
| Approved rim width | 9.5–12.5" | 9–12" | overlap 9.5–12" |
Both are approved on a rim 9.5" to 12" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 335/55R20. Fit 325/60R20 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.7 mph | +0.7 |
| 50 mph | 51.2 mph | +1.2 |
| 70 mph | 71.7 mph | +1.7 |
| 90 mph | 92.2 mph | +2.2 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,245 on the road, so it under-counts by 245. At a true 70 mph the first turns 682 times a minute, the second 666.
What drivers reported
Nobody has filed a complaint naming 335/55R20. 325/60R20 carries 2.