335/55R22 vs 325/60R22
Going from one to the other changes the overall height by +2.3 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 335/55R22 | 325/60R22 | Change |
|---|---|---|---|
| Overall height | 36.5" | 37.4" | +2.3 % |
| Sidewall | 7.25" | 7.68" | +5.8 % |
| Section width | 335 mm | 325 mm | -3.0 % |
| Circumference | 114.7" | 117.4" | +2.3 % |
| Revs per mile | 552 | 540 | -2.3 % |
| Axle height | 18.25" | 18.68" | +10.8 mm |
| Approved rim width | 9.5–12.5" | 9–12" | overlap 9.5–12" |
Both are approved on a rim 9.5" to 12" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 335/55R22. Fit 325/60R22 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.7 mph | +0.7 |
| 50 mph | 51.2 mph | +1.2 |
| 70 mph | 71.6 mph | +1.6 |
| 90 mph | 92.1 mph | +2.1 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,232 on the road, so it under-counts by 232. At a true 70 mph the first turns 645 times a minute, the second 630.