335/60R18 vs 315/65R18
Going from one to the other changes the overall height by +0.9 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 335/60R18 | 315/65R18 | Change |
|---|---|---|---|
| Overall height | 33.8" | 34.1" | +0.9 % |
| Sidewall | 7.91" | 8.06" | +1.9 % |
| Section width | 335 mm | 315 mm | -6.0 % |
| Circumference | 106.3" | 107.2" | +0.9 % |
| Revs per mile | 596 | 591 | -0.9 % |
| Axle height | 16.91" | 17.06" | +3.8 mm |
| Approved rim width | 9.5–12.5" | 8.5–11.5" | overlap 9.5–11.5" |
Both are approved on a rim 9.5" to 11.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 335/60R18. Fit 315/65R18 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.3 mph | +0.3 |
| 50 mph | 50.4 mph | +0.4 |
| 70 mph | 70.6 mph | +0.6 |
| 90 mph | 90.8 mph | +0.8 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,087 on the road, so it under-counts by 87. At a true 70 mph the first turns 696 times a minute, the second 690.