335/60R18 vs 325/65R18
Going from one to the other changes the overall height by +2.4 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 335/60R18 | 325/65R18 | Change |
|---|---|---|---|
| Overall height | 33.8" | 34.6" | +2.4 % |
| Sidewall | 7.91" | 8.32" | +5.1 % |
| Section width | 335 mm | 325 mm | -3.0 % |
| Circumference | 106.3" | 108.8" | +2.4 % |
| Revs per mile | 596 | 582 | -2.4 % |
| Axle height | 16.91" | 17.32" | +10.3 mm |
| Approved rim width | 9.5–12.5" | 9–12" | overlap 9.5–12" |
Both are approved on a rim 9.5" to 12" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 335/60R18. Fit 325/65R18 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.7 mph | +0.7 |
| 50 mph | 51.2 mph | +1.2 |
| 70 mph | 71.7 mph | +1.7 |
| 90 mph | 92.1 mph | +2.1 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,239 on the road, so it under-counts by 239. At a true 70 mph the first turns 696 times a minute, the second 679.
What drivers reported
Nobody has filed a complaint naming 335/60R18. 325/65R18 carries 2.