335/65R18 vs 315/65R18
Going from one to the other changes the overall height by -2.9 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 335/65R18 | 315/65R18 | Change |
|---|---|---|---|
| Overall height | 35.1" | 34.1" | -2.9 % |
| Sidewall | 8.57" | 8.06" | -6.0 % |
| Section width | 335 mm | 315 mm | -6.0 % |
| Circumference | 110.4" | 107.2" | -2.9 % |
| Revs per mile | 574 | 591 | +2.9 % |
| Axle height | 17.57" | 17.06" | -13.0 mm |
| Approved rim width | 9.5–12.5" | 8.5–11.5" | overlap 9.5–11.5" |
Both are approved on a rim 9.5" to 11.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 335/65R18. Fit 315/65R18 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.1 mph | -0.9 |
| 50 mph | 48.5 mph | -1.5 |
| 70 mph | 68.0 mph | -2.0 |
| 90 mph | 87.4 mph | -2.6 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,709 on the road, so it over-counts by 291. At a true 70 mph the first turns 669 times a minute, the second 690.