335/65R24 vs 355/60R24
Going from one to the other changes the overall height by -0.9 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 335/65R24 | 355/60R24 | Change |
|---|---|---|---|
| Overall height | 41.1" | 40.8" | -0.9 % |
| Sidewall | 8.57" | 8.39" | -2.2 % |
| Section width | 335 mm | 355 mm | +6.0 % |
| Circumference | 129.3" | 128.1" | -0.9 % |
| Revs per mile | 490 | 495 | +0.9 % |
| Axle height | 20.57" | 20.39" | -4.8 mm |
| Approved rim width | 9.5–12.5" | 10–13" | overlap 10–12.5" |
Both are approved on a rim 10" to 12.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 335/65R24. Fit 355/60R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.7 mph | -0.3 |
| 50 mph | 49.5 mph | -0.5 |
| 70 mph | 69.4 mph | -0.6 |
| 90 mph | 89.2 mph | -0.8 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,909 on the road, so it over-counts by 91. At a true 70 mph the first turns 572 times a minute, the second 577.