345/25R24 vs 325/30R24
Going from one to the other changes the overall height by +2.9 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 345/25R24 | 325/30R24 | Change |
|---|---|---|---|
| Overall height | 30.8" | 31.7" | +2.9 % |
| Sidewall | 3.40" | 3.84" | +13.0 % |
| Section width | 345 mm | 325 mm | -5.8 % |
| Circumference | 96.7" | 99.5" | +2.9 % |
| Revs per mile | 655 | 637 | -2.9 % |
| Axle height | 15.40" | 15.84" | +11.3 mm |
| Approved rim width | 9.5–12.5" | 9–12" | overlap 9.5–12" |
Both are approved on a rim 9.5" to 12" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 345/25R24. Fit 325/30R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.9 mph | +0.9 |
| 50 mph | 51.4 mph | +1.4 |
| 70 mph | 72.0 mph | +2.0 |
| 90 mph | 92.6 mph | +2.6 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,288 on the road, so it under-counts by 288. At a true 70 mph the first turns 764 times a minute, the second 743.