345/35R18 vs 325/35R18
Going from one to the other changes the overall height by -2.0 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 345/35R18 | 325/35R18 | Change |
|---|---|---|---|
| Overall height | 27.5" | 27.0" | -2.0 % |
| Sidewall | 4.75" | 4.48" | -5.8 % |
| Section width | 345 mm | 325 mm | -5.8 % |
| Circumference | 86.4" | 84.7" | -2.0 % |
| Revs per mile | 733 | 748 | +2.0 % |
| Axle height | 13.75" | 13.48" | -7.0 mm |
| Approved rim width | 9.5–12.5" | 9–12" | overlap 9.5–12" |
Both are approved on a rim 9.5" to 12" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 345/35R18. Fit 325/35R18 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.4 mph | -0.6 |
| 50 mph | 49.0 mph | -1.0 |
| 70 mph | 68.6 mph | -1.4 |
| 90 mph | 88.2 mph | -1.8 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,800 on the road, so it over-counts by 200. At a true 70 mph the first turns 855 times a minute, the second 873.