345/35R23 vs 325/40R23
Going from one to the other changes the overall height by +2.2 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 345/35R23 | 325/40R23 | Change |
|---|---|---|---|
| Overall height | 32.5" | 33.2" | +2.2 % |
| Sidewall | 4.75" | 5.12" | +7.7 % |
| Section width | 345 mm | 325 mm | -5.8 % |
| Circumference | 102.1" | 104.4" | +2.2 % |
| Revs per mile | 620 | 607 | -2.2 % |
| Axle height | 16.25" | 16.62" | +9.3 mm |
| Approved rim width | 9.5–12.5" | 9–12" | overlap 9.5–12" |
Both are approved on a rim 9.5" to 12" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 345/35R23. Fit 325/40R23 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.7 mph | +0.7 |
| 50 mph | 51.1 mph | +1.1 |
| 70 mph | 71.6 mph | +1.6 |
| 90 mph | 92.0 mph | +2.0 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,224 on the road, so it under-counts by 224. At a true 70 mph the first turns 724 times a minute, the second 708.