345/35R24 vs 325/35R24
Going from one to the other changes the overall height by -1.6 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 345/35R24 | 325/35R24 | Change |
|---|---|---|---|
| Overall height | 33.5" | 33.0" | -1.6 % |
| Sidewall | 4.75" | 4.48" | -5.8 % |
| Section width | 345 mm | 325 mm | -5.8 % |
| Circumference | 105.3" | 103.5" | -1.6 % |
| Revs per mile | 602 | 612 | +1.6 % |
| Axle height | 16.75" | 16.48" | -7.0 mm |
| Approved rim width | 9.5–12.5" | 9–12" | overlap 9.5–12" |
Both are approved on a rim 9.5" to 12" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 345/35R24. Fit 325/35R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.5 mph | -0.5 |
| 50 mph | 49.2 mph | -0.8 |
| 70 mph | 68.8 mph | -1.2 |
| 90 mph | 88.5 mph | -1.5 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,836 on the road, so it over-counts by 164. At a true 70 mph the first turns 702 times a minute, the second 714.