345/50R18 vs 325/55R18
Going from one to the other changes the overall height by +1.6 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 345/50R18 | 325/55R18 | Change |
|---|---|---|---|
| Overall height | 31.6" | 32.1" | +1.6 % |
| Sidewall | 6.79" | 7.04" | +3.6 % |
| Section width | 345 mm | 325 mm | -5.8 % |
| Circumference | 99.2" | 100.8" | +1.6 % |
| Revs per mile | 639 | 629 | -1.6 % |
| Axle height | 15.79" | 16.04" | +6.3 mm |
| Approved rim width | 9.5–12.5" | 9–12" | overlap 9.5–12" |
Both are approved on a rim 9.5" to 12" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 345/50R18. Fit 325/55R18 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.5 mph | +0.5 |
| 50 mph | 50.8 mph | +0.8 |
| 70 mph | 71.1 mph | +1.1 |
| 90 mph | 91.4 mph | +1.4 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,156 on the road, so it under-counts by 156. At a true 70 mph the first turns 745 times a minute, the second 734.