345/50R24 vs 335/55R24
Going from one to the other changes the overall height by +2.5 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 345/50R24 | 335/55R24 | Change |
|---|---|---|---|
| Overall height | 37.6" | 38.5" | +2.5 % |
| Sidewall | 6.79" | 7.25" | +6.8 % |
| Section width | 345 mm | 335 mm | -2.9 % |
| Circumference | 118.1" | 121.0" | +2.5 % |
| Revs per mile | 537 | 524 | -2.5 % |
| Axle height | 18.79" | 19.25" | +11.8 mm |
| Approved rim width | 9.5–12.5" | 9.5–12.5" | overlap 9.5–12.5" |
Both are approved on a rim 9.5" to 12.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 345/50R24. Fit 335/55R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.7 mph | +0.7 |
| 50 mph | 51.2 mph | +1.2 |
| 70 mph | 71.7 mph | +1.7 |
| 90 mph | 92.2 mph | +2.2 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,246 on the road, so it under-counts by 246. At a true 70 mph the first turns 626 times a minute, the second 611.