345/65R18 vs 355/60R18
Going from one to the other changes the overall height by -2.5 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 345/65R18 | 355/60R18 | Change |
|---|---|---|---|
| Overall height | 35.7" | 34.8" | -2.5 % |
| Sidewall | 8.83" | 8.39" | -5.0 % |
| Section width | 345 mm | 355 mm | +2.9 % |
| Circumference | 112.0" | 109.2" | -2.5 % |
| Revs per mile | 566 | 580 | +2.5 % |
| Axle height | 17.83" | 17.39" | -11.3 mm |
| Approved rim width | 9.5–12.5" | 10–13" | overlap 10–12.5" |
Both are approved on a rim 10" to 12.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 345/65R18. Fit 355/60R18 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.3 mph | -0.7 |
| 50 mph | 48.8 mph | -1.2 |
| 70 mph | 68.3 mph | -1.7 |
| 90 mph | 87.8 mph | -2.2 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,752 on the road, so it over-counts by 248. At a true 70 mph the first turns 660 times a minute, the second 677.