345/65R22 vs 325/65R22
Going from one to the other changes the overall height by -2.6 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 345/65R22 | 325/65R22 | Change |
|---|---|---|---|
| Overall height | 39.7" | 38.6" | -2.6 % |
| Sidewall | 8.83" | 8.32" | -5.8 % |
| Section width | 345 mm | 325 mm | -5.8 % |
| Circumference | 124.6" | 121.4" | -2.6 % |
| Revs per mile | 509 | 522 | +2.6 % |
| Axle height | 19.83" | 19.32" | -13.0 mm |
| Approved rim width | 9.5–12.5" | 9–12" | overlap 9.5–12" |
Both are approved on a rim 9.5" to 12" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 345/65R22. Fit 325/65R22 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.2 mph | -0.8 |
| 50 mph | 48.7 mph | -1.3 |
| 70 mph | 68.2 mph | -1.8 |
| 90 mph | 87.7 mph | -2.3 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,742 on the road, so it over-counts by 258. At a true 70 mph the first turns 593 times a minute, the second 609.