345/65R24 vs 355/60R24
Going from one to the other changes the overall height by -2.1 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 345/65R24 | 355/60R24 | Change |
|---|---|---|---|
| Overall height | 41.7" | 40.8" | -2.1 % |
| Sidewall | 8.83" | 8.39" | -5.0 % |
| Section width | 345 mm | 355 mm | +2.9 % |
| Circumference | 130.9" | 128.1" | -2.1 % |
| Revs per mile | 484 | 495 | +2.1 % |
| Axle height | 20.83" | 20.39" | -11.3 mm |
| Approved rim width | 9.5–12.5" | 10–13" | overlap 10–12.5" |
Both are approved on a rim 10" to 12.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 345/65R24. Fit 355/60R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.4 mph | -0.6 |
| 50 mph | 48.9 mph | -1.1 |
| 70 mph | 68.5 mph | -1.5 |
| 90 mph | 88.1 mph | -1.9 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,787 on the road, so it over-counts by 213. At a true 70 mph the first turns 565 times a minute, the second 577.