355/30R18 vs 335/30R18
Going from one to the other changes the overall height by -1.8 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 355/30R18 | 335/30R18 | Change |
|---|---|---|---|
| Overall height | 26.4" | 25.9" | -1.8 % |
| Sidewall | 4.19" | 3.96" | -5.6 % |
| Section width | 355 mm | 335 mm | -5.6 % |
| Circumference | 82.9" | 81.4" | -1.8 % |
| Revs per mile | 764 | 778 | +1.8 % |
| Axle height | 13.19" | 12.96" | -6.0 mm |
| Approved rim width | 10–13" | 9.5–12.5" | overlap 10–12.5" |
Both are approved on a rim 10" to 12.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 355/30R18. Fit 335/30R18 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.5 mph | -0.5 |
| 50 mph | 49.1 mph | -0.9 |
| 70 mph | 68.7 mph | -1.3 |
| 90 mph | 88.4 mph | -1.6 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,821 on the road, so it over-counts by 179. At a true 70 mph the first turns 892 times a minute, the second 908.