355/40R23 vs 335/45R23
Going from one to the other changes the overall height by +2.0 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 355/40R23 | 335/45R23 | Change |
|---|---|---|---|
| Overall height | 34.2" | 34.9" | +2.0 % |
| Sidewall | 5.59" | 5.94" | +6.2 % |
| Section width | 355 mm | 335 mm | -5.6 % |
| Circumference | 107.4" | 109.5" | +2.0 % |
| Revs per mile | 590 | 578 | -2.0 % |
| Axle height | 17.09" | 17.44" | +8.8 mm |
| Approved rim width | 10–13" | 9.5–12.5" | overlap 10–12.5" |
Both are approved on a rim 10" to 12.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 355/40R23. Fit 335/45R23 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.6 mph | +0.6 |
| 50 mph | 51.0 mph | +1.0 |
| 70 mph | 71.4 mph | +1.4 |
| 90 mph | 91.8 mph | +1.8 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,202 on the road, so it under-counts by 202. At a true 70 mph the first turns 688 times a minute, the second 675.