355/40R24 vs 345/45R24
Going from one to the other changes the overall height by +3.0 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 355/40R24 | 345/45R24 | Change |
|---|---|---|---|
| Overall height | 35.2" | 36.2" | +3.0 % |
| Sidewall | 5.59" | 6.11" | +9.3 % |
| Section width | 355 mm | 345 mm | -2.8 % |
| Circumference | 110.5" | 113.8" | +3.0 % |
| Revs per mile | 573 | 557 | -3.0 % |
| Axle height | 17.59" | 18.11" | +13.3 mm |
| Approved rim width | 10–13" | 9.5–12.5" | overlap 10–12.5" |
Both are approved on a rim 10" to 12.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 355/40R24. Fit 345/45R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.9 mph | +0.9 |
| 50 mph | 51.5 mph | +1.5 |
| 70 mph | 72.1 mph | +2.1 |
| 90 mph | 92.7 mph | +2.7 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,297 on the road, so it under-counts by 297. At a true 70 mph the first turns 669 times a minute, the second 650.