355/50R21 vs 335/50R21
Going from one to the other changes the overall height by -2.3 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 355/50R21 | 335/50R21 | Change |
|---|---|---|---|
| Overall height | 35.0" | 34.2" | -2.3 % |
| Sidewall | 6.99" | 6.59" | -5.6 % |
| Section width | 355 mm | 335 mm | -5.6 % |
| Circumference | 109.9" | 107.4" | -2.3 % |
| Revs per mile | 577 | 590 | +2.3 % |
| Axle height | 17.49" | 17.09" | -10.0 mm |
| Approved rim width | 10–13" | 9.5–12.5" | overlap 10–12.5" |
Both are approved on a rim 10" to 12.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 355/50R21. Fit 335/50R21 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.3 mph | -0.7 |
| 50 mph | 48.9 mph | -1.1 |
| 70 mph | 68.4 mph | -1.6 |
| 90 mph | 88.0 mph | -2.0 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,775 on the road, so it over-counts by 225. At a true 70 mph the first turns 673 times a minute, the second 688.